Television Spares & Parts

VML3167 main lever arm assembly for Panasonic VCR's Fits Panasonic VCR's fitted with the Z mechanism.Can cause a mechanism jam when one of the lugs breaks off.Please refer to the model compatibility list before ordering. Fits models:NVFJ600, NVFJ603,...

​JVC genuine control plate / rack slider unit for VHS VCR's. Plastic parts can come adrift from this control plate causing a mechanism jam. Manufacturers original part number: LP10080-002H Fits JVC Models: HRJ255, HRJ455, HRJ655,...

​Philips genuine metal door opener lever for VHS video cassette recorders. This genuine lever has part number: 482240352252 It was often used in the VR6462 VHS VCR. The small pin can snap off causing a no door open function and a subsequent...

Panasonic genuine back tension band for VHS VCR's This tenson band unit is part number VXZ0165 It was used in models NVG7 and NVG12 but may fit other models too. Please check the compatibility before ordering. Commonly...

​Philips genuine metal door opener lever for VHS video cassette recorders. This genuine lever has part number: 482240352252 It was often used in the VR6462 VHS VCR. The small pin can snap off causing a no door open function and a subsequent...

VXL2672 supply side loading arm unit for Panasonic VCR's This loading arm assembly is a complete unit with the tension spring inside. The plastic lug can snap off causing the supply guide roller to not lock fully in...

Brand new Vestel 17PW26-5 power supply pcb. This power supply board is fitted to a wide variety of models from Toshiba, Bush, Sanyo, Telefunken, Techwood, Hitachi and many more.  The Vestel part numbers for this board are: 20487645...

​Vestel mains input filter for LED back light television power supplies. The filter part number is 30071121 and this is normally printed on the underside of the coil when removed from the PCB. The coil is wired in the mains input circuit and passes...

​2 x S2000A3 NPN power transistors. The S2000 range of transistors are commonly used in colour television horizontal output applications and in the switching power supplies of colour televisions. The transistor has a maximum collector emitter...

​Genuine Vestel LED bar / strip for LED back lit televisions. The original reference on ths strip is 42FHD-L NDV REV0.2C Type 2013. The strip contains 8 LEDs with different spacing, this strip is the Type C that is fitted to...

​Genuine Vestel LED bar / strip for LED back lit televisions. The original reference on ths strip is 42FHD-L NDV REV0.2A Type 2013. The strip contains 8 LEDs with different spacing, this strip is the Type A that is fitted to...

​TDA8350Q Genuine Philips DC coupled vertical deflection IC with integral east west output circuit. This IC is commonly used in many CRT televisions as the frame output chip. Supplied in a 13 pin package with a bent pin...

​Panasonic genuine repair kit for selected Panasonic plasma televisions. Kit part number: TZS9EK097 can often cure a dead Panasonic plasma television. On certain models after the power is interrupted you may encounter...

This is the Y sustain pcb assembly suitable for fitting into the 50PX4D 50 inch plasma television. The part number of this board assembly is 6871QYH039A. The superseded part number is 6871QYH039B. The board supplied is a brand new original LG part...

The 6709900002A power supply fitted to the LG RZ37LZ55 does have some reliability issues. Failure of this power supply is common with the resulting symptom that the set is completely dead or stuck in standby. The power supply often fails at switch...

This is a complete repair kit suitable for any plasma television using an LG V7 PDP, (plasma display panel), unit. Many manufacturers use the LG V7 PDP unit as the screen for their televisions. The PDP unit is basically the main screen assembly and...