3 Pack Of Konstsmide 5042-330 LED 14-55V, 0.3W, E10 Frosted Candle Bridge Bulb

​3 pack of genuine Konstsmide 5042-330 LED 14-55V 0.3W, E10 frosted spare bulbs for 4-16 set candle bridges.

This E10 lamp can be used in many Konstsmide welcome lamp candle bridge light units. The universal voltage rating of 14V - 55V means that they are suitable for use in virtually all series connected light units.

Suitable for replacing commonly used candle bridge light bulbs with 23V, 34V and 55V rating. Also suitable for any mains operated series connected light set that has between 4 and 16 bulbs.

The lamps are LED versions with an average lifetime of around 50,000 hours. You can use them to convert your existing light units from incandescent lamps to an LED version. Please note that you must replace all of the lamps to LED versions initially. You cannot mix LED and incandescent lamps in the same light unit.

You will also save energy as this LED version uses 10 times less power than the equivalent incandescent version.

Please note the lamp thread is an E10 type which means that the diameter of the screw in base is 10mm. It is technically the spacing between the thread crests on each side of the bulb.

Check your lamps size before ordering.

You can use this Swedish quality genuine lamp in other brands of candle bridge as well such as Premier, Lumineo, Pifco, Dencon etc, just check the specifications before ordering.

Let's Look at the lamp specifications:

• Lamp Type: Incandescent Tulip / Conical Lamp
• Colour: Frosted / Warm White
  
• Lamp Voltage: 14V - 55V AC or DC
• Lamp Power: 0.3W
• Average Lifetime: 50,000 Hours
  
• Thread Size: E10 / 10mm
• Lamp Dimensions: 45.0mm x 12.7mm
  
• Pack Size: 3 Bulbs Supplied
• Brand: Konstsmide Retail Packed
• Konstsmide Reference: 5042-330