TheOneStopSatShop
Microwave Oven High Voltage Fuse Tube 800mA 0.8A 5kV
- SKU:
- HVTUBE800MA
- UPC:
- 5060239760040
- MPN:
- HVTUBE800MA
- Condition:
- New
- Availability:
- Available Now With Free UK Shipping
- Weight:
- 1.00 Grams
- Width:
- 0.65 (cm)
- Height:
- 4.00 (cm)
- Depth:
- 0.65 (cm)
- Shipping:
- Calculated at Checkout
Description
Replacement type 800mA high voltage fuse tube for
modern microwave ovens. This high voltage fuse is wired in series with
the high voltage feed from the high voltage transformer to the
magnetron.
The fuse will fail if there is a fault in the high voltage circuit.
Such a fault could be a short circuit magnetron or a short circuit high
voltage rectifier. In our experience however this fuse commonly fails
for no apparent reason.
The fuse just gets stressed everytime the magnetron starts which
eventually leads to the demise of the fuse. The fuse however may also
fail if the microwave cooking cycle is started with no food or metal
objects in the oven cavity.
If you have a microwave with this type of fuse then the symptom you
will get if it has failed is no cooking action. The microwave will
appear to start and countdown time but there will be no heating action.
The fuse is easy to check visibly by unscrewing the fuse housing
apart as shown in the photograph. You can then visually examine the wire
in the fuse to see if it has broken. For the more technically minded a
continuity check with an ohm meter will also check the fuse. A short
circuit reading should be obtained if the fuse is intact.
The fuse can be
replaced as a complete holder assembly though in this case the glass
tube only is offered. This will alow a cheaper and equally as effective
repair. In most instances the glass tube can simply be pulled from the
end caps of the fuse holder.
The fuse holder is opened by twisting each end in opposite
directions. Some high voltage fuse assemblies are smaller and
rectangular in shape but in most cases after clipping apart a fuse tube,
as shown here, is fitted inside. It is not relevant if your fuse tube
does not have the coiled spring inside as ours do.
This is the technical specification of the fuse:
- Current Rating 800mA, 0.8A
- Voltage Rating 5kV/ 5000V
- Overall Length of Fuse Tube: 40mm
- Fuse Tube Diameter: 6.5mm
This type of fuse
is fitted to many brands of microwaves and this particular type of fuse
is suitable for replacement in any brand. Check the rating of the
original fuse and replace with the correct value.
To fit this fuse it is necessary to remove the outer casing so
replacement should only be attempted by those who have experience in the
repair of electrical appliances.
High voltages are present in a microwave oven and it is important
that the appliance is disconnected from the mains before any servicing
work is carried out.
Additional Information
Product Information: |
800mA / 0.8A 5 kV High Voltage Fuse Tube For Microwave Ovens |
Product Information: |
Glass Fuse Tube Dimensions: 6.5mm x 40mm |
Product Information: |
Fuse Normally Fitted Inside A White Plastic Holder |
Product Information: |
Can Cure A No Cooking Action Symptom With Your Microwave Oven |
Product Information: |
Compatible With Most Brands & Models of Microwave Ovens |
1 Review
-
MICROWAVE OVEN HIGH VOLTAGE FUSE TUBE 800MA 0.8A 5KV
Just the job-fits perfect-and works a treat. I would certainly buy again if needed.
Related Products
LG 800mA 0.8A 5kV Microwave Oven High Voltage Fuse 6901W1A001C Fits Many Models
LG
Price:
AUD14.05
LG high quality genuine 800mA, 0.8A, 5kV high voltage fuse assembly for modern microwave ovens.
6901W1A001C
Microwave Oven High Voltage Fuse Tube 750mA 0.75A 5kV
TheOneStopSatShop
Price:
AUD4.60
Replacement typ
HVTUBE750MA
Microwave Oven High Voltage Fuse Tube 700mA 0.7A 5kV
TheOneStopSatShop
Price:
AUD4.60
Replacement typ
HVTUBE700MA